| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 45 |
| BODY STYLE | STANDARD ROUND DOUBLE FLANGE B |
| DISTANCE BETWEEN FLANGES | 2.2500 INCHES NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| FLANGE DIAMETER | 4.5000 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2510 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 1.1870 INCHES NOMINAL SHOULDER |
| PILOT DIAMETER | 1.6250 INCHES MAXIMUM |
| PILOT LENGTH | 0.3130 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 50.0 CELSIUS |
| OVERALL LENGTH | 7.5300 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.3500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD CLASS | 3A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TIP LENGTH | 0.2120 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED, THREADED, UNDERCUT SINGLE SHAFT |
| SHAFT UNDERCUT WIDTH | 0.0700 INCHES NOMINAL SINGLE SHAFT |
| SHAFT UNDERCUT DIAMETER | 0.2190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.9700 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 4.2500 INCHES MAXIMUM |
| SPECIAL FEATURES | SHAFT TO BE FITTED WITH NO. 00 WOOD RUFF KEY WHITNEY NO. 207 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-2335 GOVERNMENT SPECIFICATION |
| STATOR INPUT CURRENT RATING | 2.0 AMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 23.0 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-2335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TORQUE GRADIENT PER ANGULAR DEG | 4.000 INCH-OUNCES MAXIMUM |