| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 5 |
| BODY STYLE | STANDARD ROUND DOUBLE FLANGE B |
| DISTANCE BETWEEN FLANGES | 1.8070 INCHES MINIMUM AND 1.8170 INCHES MAXIMUM |
| FLANGE DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM SHOULDER |
| PILOT DIAMETER | 1.6300 INCHES MAXIMUM |
| PILOT LENGTH | 0.1750 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 50.0 CELSIUS |
| OVERALL LENGTH | 6.3600 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY | 0.0081 INCHES NOMINAL |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.1770 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHAFT LENGTH | 0.7600 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM SINGLE SHAFT |
| SHOULDER DIAMETER | 3.3750 INCHES MAXIMUM |
| SPECIAL FEATURES | ROUND,THREADED SHAFT WITH SLOT; SLOT DEPTH 0.050 INCH; SLOT WIDTH 0.035 INCH |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-2335 GOVERNMENT SPECIFICATION |
| STATOR INPUT CURRENT RATING | 1.0 AMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 15.0 WATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-2335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MINIMUM |