5365-01-424-6598 SHIM Index 5365-01-424-6600 SPACER,PLATE

National Stock Number:
5365-01-424-6599

Federal Supply Class:
5365

National Item Identification Number:
014246599

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
17G230250-31788277THE BOEING COMPANY


Techincal Specification:
BOLT HOLE QUANTITY3
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH7.470 INCHES MINIMUM AND 7.530 INCHES MAXIMUM
CONSTRUCTIONLAMINATED
HOLE DIAMETER1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
LAMINATION QUANTITY1
LAMINATION THICKNESS0.003 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-22499 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 302 OR STEEL COMP 304
PART NAME ASSIGNED BY CONTROLLING AGENCYSHIM
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH4.970 INCHES MINIMUM AND 5.030 INCHES MAXIMUM
OVERALL LENGTH24.970 INCHES MINIMUM AND 25.030 INCHES MAXIMUM
OVERALL THICKNESS0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
OVERALL WIDTH3.730 INCHES MINIMUM AND 3.790 INCHES MAXIMUM
SPECIAL FEATURESSTOCK SIZE .250X3.75X25.00. MATERIAL CLASS 2, COMP 3, TYPE 1
STYLE DESIGNATORNON-CIRCULAR W/BEVELED CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE TREATMENT RESPONSE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us