5365-01-424-6598, SHIM

National Stock Number:
5365-01-424-6598

Federal Supply Class:
5365

National Item Identification Number:
014246598

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

17G230250-311

88277

THE BOEING COMPANY

Techincal Specification:

BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	11.970 INCHES MINIMUM AND 12.030 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.850 INCHES MINIMUM AND 2.910 INCHES MAXIMUM
CONSTRUCTION	LAMINATED
HOLE DIAMETER	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
LAMINATION QUANTITY	1
LAMINATION THICKNESS	0.003 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-22499 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 302 OR STEEL COMP 304
PART NAME ASSIGNED BY CONTROLLING AGENCY	SHIM
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.270 INCHES MINIMUM AND 1.330 INCHES MAXIMUM
OVERALL LENGTH	5.470 INCHES MINIMUM AND 5.530 INCHES MAXIMUM
OVERALL THICKNESS	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
OVERALL WIDTH	14.970 INCHES MINIMUM AND 15.030 INCHES MAXIMUM
SPECIAL FEATURES	MATERIAL CLASS 2, COMP 3, TYPE 1. STOCK SIZE .250X5.50X15.00
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE TREATMENT RESPONSE

Click here to Register for Free 30-day Trial