|
|
|
National Stock Number:
5365-01-409-0138
Federal Supply Class:
5365
National Item Identification Number:
014090138
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 211066387 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-6406618-24 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF2081-239 FIND 24 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.437 INCHES NOMINAL | | HOLE DIAMETER | 0.529 INCHES MINIMUM AND 0.539 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316L | | OUTSIDE CORNER RADIUS | 0.150 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.562 INCHES NOMINAL | | OVERALL LENGTH | 4.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.620 INCHES NOMINAL | | OVERALL WIDTH | 2.150 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SPECIAL FEATURES | TWO CORNERS ON ONE SIDE OF LENGTH ARE CHAMFERED 45.0 DEGREES; SAME SIDE OF LENGTH HAS TWO SLOTS; EACH SLOT HAS A NOMINAL WIDTH OF 0.375 INCHES. |
|
|