|
|
|
National Stock Number:
5365-01-409-0137
Federal Supply Class:
5365
National Item Identification Number:
014090137
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 211066392 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-6406618-20 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF2081-239 FIND 20 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.250 INCHES NOMINAL | | HOLE DIAMETER | 0.529 INCHES MINIMUM AND 0.539 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.150 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.594 INCHES NOMINAL | | OVERALL LENGTH | 4.330 INCHES NOMINAL | | OVERALL THICKNESS | 0.620 INCHES NOMINAL | | OVERALL WIDTH | 1.770 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316L | | SPECIAL FEATURES | ONE SIDE OF LENGTH AND ONE SIDE OF WIDTH ARE TAPERED; THE TAPERED SIDE OF LENGTH HAS NOMINAL LENGTH OF 3.500 INCHES; THE NONTAPERED SIDE OF WIDTH HAS NOMINAL WIDTH OF 1.530 INCHES; THE TAPERED SIDE OF LENGTH HAS A SLOT WITH A NOMINAL WIDTH OF 0.375 INCHES. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|