|
|
|
National Stock Number:
5315-01-120-4478
Federal Supply Class:
5315
National Item Identification Number:
011204478
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10122920 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 196B7680 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.500 INCHES NOMINAL | | CHAMFER LENGTH | 0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | DIAMETER | 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM | | HEAD STYLE | FLAT FILLISTER | | HEIGHT | 0.500 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.690 INCHES MINIMUM AND 1.710 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|