|
|
|
National Stock Number:
5315-01-120-4477
Federal Supply Class:
5315
National Item Identification Number:
011204477
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10122919 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 196B7505 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.160 INCHES NOMINAL | | CHAMFER LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | DIAMETER | 0.2995 INCHES MINIMUM AND 0.3005 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT | | HEIGHT | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM | | UNDER HEAD LENGTH | 0.520 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TYPE M,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE OR DOD-P-16232,TYPE Z,CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
|
|