|
|
|
National Stock Number:
5310-01-250-6722
Federal Supply Class:
5310
National Item Identification Number:
012506722
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10096052-101 | 94580 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | THREAD LENGTH | 0.125 INCHES MINIMUM | | FLANGE THICKNESS | 0.090 INCHES NOMINAL | | NUT DIAMETER | 0.160 INCHES NOMINAL | | NUT LENGTH | 0.160 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | HEXAGONAL FLANGE |
|
|