|
|
|
National Stock Number:
5310-01-250-6721
Federal Supply Class:
5310
National Item Identification Number:
012506721
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 209-001-367-103 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| HOLE TYPE AND QUANTITY | 6 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659,COND A ASSN STD 1ST MATERIAL RESPONSE OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-12 OR STEEL COMP 630 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 1.312 INCHES | | NUT WIDTH ACROSS FLATS | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | NUT LENGTH | 0.890 INCHES MINIMUM AND 0.895 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.434 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNJEF | | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B |
|
|