|
|
|
National Stock Number:
5306-01-420-3601
Federal Supply Class:
5306
National Item Identification Number:
014203601
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 03A303-4H9 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 84114-4H9 | 56878 | SPS TECHNOLOGIES, LLC | | PBF1573-4H9 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| FASTENER LENGTH | 0.944 INCHES MINIMUM AND 0.974 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD HEIGHT | 0.154 INCHES MINIMUM AND 0.174 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.447 INCHES MINIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE DIAMETER | 0.041 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | 145,000 P.S.I. MIN. SHEAR | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.397 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|