|
|
|
National Stock Number:
5306-01-420-3600
Federal Supply Class:
5306
National Item Identification Number:
014203600
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 03A095-8-41 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A095-8-41 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | LB58-8-41 | 73197 | HI-SHEAR CORPORATION | | AS402-8-41 | 84256 | AVIBANK MFG., INC. |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.126 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 3.238 INCHES MINIMUM AND 3.258 INCHES MAXIMUM | | GRIP DIAMETER | 0.4986 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM | | GRIP LENGTH | 2.562 INCHES MINIMUM AND 2.578 INCHES MAXIMUM | | HEAD HEIGHT | 0.251 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | LOCKING FEATURE | DETENT BALL GRIP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | MATERIAL | NICKEL ALLOY 718 FASTENER | | MATERIAL | NICKEL ALLOY X-750 OR COBALT ALLOY SPRING | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | SPINDLE AND PAWL MATERIAL: PH13-8MO OR 17-4PH. PLUG MATERIAL: CRES TYPE 303. BALL MATERIAL: CRES TYPE 440C | | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | SURFACE TREATMENT | PASSIVATE SPRING | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.670 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|