|
|
|
National Stock Number:
5305-01-132-8529
Federal Supply Class:
5305
National Item Identification Number:
011328529
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| D7500P-10-B-3 | 0HDW7 | HUCK INTERNATIONAL, INC. | | D7500P-10-B-3 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.527 INCHES MINIMUM AND | | 0.567 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 HEAD | | STEEL COMP 302 SPRING | | ALUMINUM ALLOY 6061 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 384 OR | | STEEL COMP 385 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HEAD | | QQ-W-423,COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING | | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | SURFACE TREATMENT | ANODIZE HEAD | | PASSIVATE SPRING | | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.451 INCHES NOMINAL | | HEAD HEIGHT | 0.290 INCHES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | SPECIAL FEATURES | HEAD VERTICALLY KNURLED |
|
|