|
|
|
National Stock Number:
5305-01-132-8528
Federal Supply Class:
5305
National Item Identification Number:
011328528
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BM19045-614A | 17446 | HUCK INTERNATIONAL, INC | | BM19045-614A | 97928 | HUCK INTL INC | | GB510CE6-14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510N6A14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HT326-6A14 | 73197 | HI-SHEAR CORPORATION | | HT326-6A14 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | SFH22D6A14 | 56878 | SPS TECHNOLOGIES, LLC | | SFH22D6A14 | 80539 | SPS TECHNOLOGIES, LLC | | HT8181F6-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.374 INCHES MINIMUM AND | | 0.441 INCHES MAXIMUM | | FASTENER LENGTH | 1.259 INCHES MINIMUM AND | | 1.306 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD 1ST TREATMENT RESPONSE OR | | MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.698 INCHES MINIMUM AND | | 0.762 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.865 INCHES MINIMUM AND | | 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.6580 INCHES MINIMUM AND | | 0.6582 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SPECIFICATION/STANDARD DATA | 26512-GB510N MANUFACTURERS STANDARD | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 |
|
|