|
|
|
National Stock Number:
5305-01-089-6020
Federal Supply Class:
5305
National Item Identification Number:
010896020
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| FT1135-10B-4 | 58794 | FASTENER TECHNOLOGY CORP | | FTP7138-10-B-4 | 58794 | FASTENER TECHNOLOGY CORP | | HS4103-10B-4 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | HS4103-10B-4 | 58794 | FASTENER TECHNOLOGY CORP | | HS4103-10B-4 | 8V613 | THE BOEING COMPANY | | PPD79-10-B-4 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.588 INCHES MINIMUM AND | | 0.670 INCHES MAXIMUM | | FASTENER LENGTH | 0.650 INCHES MINIMUM AND | | 0.670 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304 STAND-OFF | | STEEL COMP 8740 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE STAND-OFF | | CADMIUM AND | | CHROMATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 41.0 ROCKWELL C MAXIMUM FASTENER | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.360 INCHES NOMINAL | | HEAD HEIGHT | 0.128 INCHES NOMINAL | | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM |
|
|