|
|
|
National Stock Number:
5305-01-089-6019
Federal Supply Class:
5305
National Item Identification Number:
010896019
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| CA11020-3B-4-12S | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA1174B-4-12S | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.297 INCHES MINIMUM AND | | 0.327 INCHES MAXIMUM | | FASTENER LENGTH | 0.730 INCHES MINIMUM AND | | 0.770 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 308 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 STAND-OFF | | STEEL COMP 301 OR | | STEEL COMP 302B OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 385 FASTENER | | SURFACE TREATMENT | OXIDE STAND-OFF | | OXIDE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FLAT COUNTERSUNK | | COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 29372 | | DESIGN CONTROL REFERENCE | CA11020-3B-4-12S |
|
|