| CONNECTION TYPE | RECESSED FLANGE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 215.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND |
| 2ND LAYER BRAIDED STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 16.000 INCHES |
| FLANGE THICKNESS | 0.310 INCHES MINIMUM AND |
| 0.320 INCHES MAXIMUM 1ST END |
| INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RECESSED W/GASKET GROOVE 1ST END |
| RECESS DIAMETER | 1.125 INCHES NOMINAL 1ST END |
| RECESS DEPTH | 0.026 INCHES NOMINAL 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| FLANGE OUTSIDE DIAMETER | 1.990 INCHES MINIMUM AND |
| 2.010 INCHES MAXIMUM 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 10867393 |