| BORE DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-197 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 410/SAE 51410 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 440C FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 440C FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 440C FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 410 RETAINER |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| OVERALL OUTSIDE DIAMETER | 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1950 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | PRESSED |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALLS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 73030-738034-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |