| BORE DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.4390 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0280 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-197 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 440A OVERALL |
| OUTER RING OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | PRESSED |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C.64.0 ROCKWELL HARDNESS RINGS AND BALLS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 73030-738048-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |