4720-01-523-9589 HOSE ASSEMBLY,NONMETALLIC Index 5920-01-523-9591 FUSE,CARTRIDGE

National Stock Number:
9540-01-523-9590

Federal Supply Class:
9540

National Item Identification Number:
015239590

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
60-1293629321TRANSTAR METALS CORP
AMS-QQ-A-20081343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-STD-18481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS3066198897LOCKHEED MARTIN CORP
LS30661-198897LOCKHEED MARTIN CORP


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.647 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.088 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEG THICKNESS0.088 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT2.201 INCHES MINIMUM AND 2.249 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
PART NAME ASSIGNED BY CONTROLLING AGENCYTEE SECTION-EXTRUDED
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.478 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.088 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
SPECIFICATION/STANDARD DATA81348-QQ-A-277 GOVERNMENT SPECIFICATION
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH4.091 INCHES MINIMUM AND 4.159 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us