9540-01-450-0851, BEAM,STRUCTURAL

National Stock Number:
9540-01-450-0851

Federal Supply Class:
9540

National Item Identification Number:
014500851

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

10136-1406	29321	TRANSTAR METALS CORP
AMS10136-1406	0U583	SAE INTERNATIONAL
AMS1036-1406/ASTM B331-T6511	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
AND10136-1406/ASTM B221-T6511	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
AMS10136-1406	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AND10136-1406	99237	AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
ASTM B221	0U583	SAE INTERNATIONAL
AND10136-1406/QQ-A-200/11-T6511	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
ASTM B221	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP RADIUS	0.094 INCHES NOMINAL
FIRST TIP STYLE	LOWER RADIUS
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.750 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEG THICKNESS	0.094 INCHES NOMINAL
LENGTH	12.000 FEET NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	7075 ALLOY AND T6511 TEMPER
OVERALL HEIGHT	1.250 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.750 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
THIRD TIP RADIUS	0.047 INCHES NOMINAL
THIRD TIP STYLE	FULL RADIUS
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	NOT IDENTICAL
TOP FLANGE WIDTH	1.500 INCHES NOMINAL

Click here to Register for Free 30-day Trial