|
|
|
National Stock Number:
9540-01-435-9666
Federal Supply Class:
9540
National Item Identification Number:
014359666
Description:
BEAM,STRUCTURAL
Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
|
Manufacturer Information:
| AMS-QQ-A-200/11 | 0U583 | SAE INTERNATIONAL | | AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | CVC10050-111CAX144 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | CVC10050-111CA | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BASIC SHAPE STYLE | Z SHAPE | | BOTTOM FLANGE WIDTH | 1.310 INCHES NOMINAL | | FABRICATION METHOD | EXTRUDED | | FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL | | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL | | FIRST TIP STYLE | SQUARE END | | HEAT TREATMENT | O-ANNEALED | | LEFT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL | | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL | | LENGTH | 12.000 FEET NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | NONDEFINITIVE SPEC/STD DATA | 7075 ALLOY AND 0 TEMPER | | OVERALL HEIGHT | 2.190 INCHES NOMINAL | | RIGHT BOTTOM INSIDE ANGLE | 84.0 DEGREES NOMINAL | | RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.125 INCHES NOMINAL | | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL | | TOP FLANGE WIDTH | 0.750 INCHES NOMINAL | | WEB FLANGE THICKNESS | 0.125 INCHES NOMINAL |
|
|