|
|
|
National Stock Number:
9540-01-435-8736
Federal Supply Class:
9540
National Item Identification Number:
014358736
Description:
BEAM,STRUCTURAL
Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
|
Manufacturer Information:
| CVC10012-174GA | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | CVC10012-174GAX144 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | MIL-T-81556 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BASIC SHAPE STYLE | T SHAPE | | FABRICATION METHOD | EXTRUDED | | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL | | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL | | FIRST TIP STYLE | SQUARE END | | HEAT TREATMENT | ANNEALED | | LEFT TOP INSIDE ANGLE | 88.0 DEGREES NOMINAL | | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.330 INCHES NOMINAL | | LEFT SIDE TOP FLANGE THICKNESS | 0.150 INCHES NOMINAL | | LEG THICKNESS | 0.150 INCHES NOMINAL | | LENGTH | 12.000 FEET NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-81556, COMP AB-1 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | NONDEFINITIVE SPEC/STD DATA | AB-1 COMPOSITION AND ANNEALED CONDITION | | OVERALL HEIGHT | 2.020 INCHES NOMINAL | | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.170 INCHES NOMINAL | | RIGHT SIDE TOP FLANGE THICKNESS | 0.150 INCHES NOMINAL | | RIGHT TOP INSIDE ANGLE | 92.0 DEGREES NOMINAL | | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL | | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP | | TOP FLANGE WIDTH | 3.500 INCHES NOMINAL |
|
|