9540-01-430-5412, BEAM,STRUCTURAL

National Stock Number:
9540-01-430-5412

Federal Supply Class:
9540

National Item Identification Number:
014305412

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

AMS-QQ-A-200/15	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/15	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
CVC10030-12CJ	80378	TRIUMPH AEROSTRUCTURES, LLC
QQ-A-200/15	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS	0.020 INCHES NOMINAL
FIRST TIP OUTER RADIUS	0.020 INCHES NOMINAL
FIRST TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
HEAT TREATMENT	T-76511 SOLUTION HEAT TREATED
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.992 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT	2.000 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.008 INCHES NOMINAL
LENGTH	12.000 FEET NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/15 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	7075 ALLOY AND T76511 TEMPER
OVERALL WIDTH	2.500 INCHES NOMINAL
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.122 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	2.250 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.128 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
WEB FLANGE THICKNESS	0.125 INCHES NOMINAL

Click here to Register for Free 30-day Trial