9540-01-324-4368 BEAM,STRUCTURAL Index 5985-01-324-4370 SWITCH,RADIO FREQUENCY TRANSMISS

National Stock Number:
9540-01-324-4369

Federal Supply Class:
9540

National Item Identification Number:
013244369

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
60-1923729321TRANSTAR METALS CORP
AMS-QQ-A-200/30U583SAE INTERNATIONAL
LS043-1225 2024-T351143999THE BOEING COMPANY
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLEH SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP STYLESQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
HEAT TREATMENTT-3511 SOLUTION HEAT TREATED
LEFT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT2.000 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS0.063 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL WIDTH2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATAT3511 TEMPER
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT2.000 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS0.063 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEB FLANGE THICKNESS0.063 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.460 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us