4720-01-137-9742 HOSE ASSEMBLY,NONMETALLIC Index 4320-01-137-9745 PUMP UNIT,CENTRIFUGAL

National Stock Number:
9540-01-137-9744

Federal Supply Class:
9540

National Item Identification Number:
011379744

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1M86676301THE BOEING COMPANY
60-532229321TRANSTAR METALS CORP
AMS-QQ-A-200/130U583SAE INTERNATIONAL
60-714829321TRANSTAR METALS CORP
MM02833876301THE BOEING COMPANY
AMS-QQ-A-200/1381343SOCIETY OF AUTOMOTIVE ENGINEERS INC


Techincal Specification:
BASIC SHAPE STYLEH SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG0.090 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG0.090 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.090 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.090 INCHES NOMINAL
FIRST TIP RADIUS0.063 INCHES NOMINAL
FIRST TIP STYLERIGHT QUARTER RADIUS
FOURTH TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/SECOND TIP
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
LEFT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.782 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT1.593 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS0.063 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.811 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/13 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7178
NONDEFINITIVE SPEC/STD DATA7178 ALLOY AND T6 TEMPER
OVERALL WIDTH1.570 INCHES NOMINAL
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.121 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT2.153 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS0.063 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.032 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RADIUS0.063 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPNOT IDENTICAL
SECOND TIP STYLELEFT QUARTER RADIUS
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
WEB FLANGE THICKNESS0.063 INCHES NOMINAL
WEIGHT PER UNIT MEASURE1.570 POUNDS PER LINEAR FOOT


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us