5910-00-556-9154 CAPACITOR,FIXED,PAPER DIELECTRIC Index 5895-00-556-9162 MIXER STAGE,FREQUENCY

National Stock Number:
9540-00-556-9158

Federal Supply Class:
9540

National Item Identification Number:
005569158

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
LS1458398897LOCKHEED MARTIN CORP


Techincal Specification:
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG0.100 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG0.100 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.100 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.100 INCHES NOMINAL
FIRST TIP STYLESQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
HEAT TREATMENTO-ANNEALED
LEFT BOTTOM INSIDE ANGLE102.3 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE THICKNESS0.080 INCHES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.605 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.625 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.090 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAO TEMPER
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.645 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS0.080 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.625 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.090 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT BOTTOM INSIDE ANGLE77.7 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEB FLANGE THICKNESS0.090 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.644 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH1.250 INCHES NOMINAL
FABRICATION METHODEXTRUDED
BOTTOM FLANGE WIDTH3.250 INCHES NOMINAL
BASIC SHAPE STYLEI SHAPE


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us