9540-00-246-4395, BEAM,STRUCTURAL

National Stock Number:
9540-00-246-4395

Federal Supply Class:
9540

National Item Identification Number:
002464395

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

182395	01634	ALUMINUM CO OF AMERICA
28505	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
AMS-QQ-A-200/11	0U583	SAE INTERNATIONAL
60-3316	29321	TRANSTAR METALS CORP
AMS-QQ-A-200/11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS5673	98897	LOCKHEED MARTIN CORP
PA21054	06012	TRANSTAR METALS CORP
QQA200-11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	Z SHAPE
BOTTOM FLANGE WIDTH	0.900 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.060 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.060 INCHES NOMINAL
FIRST TIP INNER RADIUS	0.030 INCHES NOMINAL
FIRST TIP OUTER RADIUS	0.030 INCHES NOMINAL
FIRST TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE THICKNESS	0.048 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OUTER RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE	0.030 INCHES NOMINAL
OUTER RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE	0.030 INCHES NOMINAL
OVERALL HEIGHT	0.486 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.048 INCHES NOMINAL
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEIGHT PER UNIT MEASURE	0.118 POUNDS PER LINEAR FOOT
WEB FLANGE THICKNESS	0.048 INCHES NOMINAL
TOP FLANGE WIDTH	0.750 INCHES NOMINAL

Click here to Register for Free 30-day Trial