9520-00-277-7305, BEAM,STRUCTURAL

National Stock Number:
9520-00-277-7305

Federal Supply Class:
9520

National Item Identification Number:
002777305

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

ABS RULES	0T3K3	AMERICAN BUREAU OF SHIPPING
MIL-S-22698	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	HOT ROLLED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.400 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.400 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.400 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.400 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
HEAT TREATMENT	AS FABRICATED
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	3.750 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT	7.500 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.500 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	3.750 INCHES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	30.000 FEET MINIMUM AND 40.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ABS RULES, GRADE AH36 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL WIDTH	18.000 INCHES NOMINAL
MATERIAL	STEEL
NONDEFINITIVE SPEC/STD DATA	AH36 GRADE
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	3.750 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	7.500 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.500 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	3.750 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
WEB FLANGE THICKNESS	0.375 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	50.000 POUNDS PER LINEAR FOOT

Click here to Register for Free 30-day Trial