9390-00-250-8714 NONMETALLIC CHANNEL Index 9390-00-250-8720 NONMETALLIC CHANNEL

National Stock Number:
9390-00-250-8719

Federal Supply Class:
9390

National Item Identification Number:
002508719

Description:
NONMETALLIC CHANNEL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.


Manufacturer Information:
AS0-357-180132NAVAL INVENTORY CONTROL POINT
ASO-357-180132NAVAL INVENTORY CONTROL POINT
S108032818355THE BOEING COMPANY
S154675345KIRKHILL, INC.
S108032888277THE BOEING COMPANY


Techincal Specification:
BASE FLANGE THICKNESS0.062 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLESEMI-CLOSED CHANNEL
ENVIRONMENTAL PROTECTIONOIL RESISTANT AND OZONE RESISTANT AND WEATHER RESISTANT
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE0.031 INCHES NOMINAL
FILLET RADIUS WHERE LEFT FLANGE JOINS TOP FLANGE0.031 INCHES NOMINAL
FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE0.031 INCHES NOMINAL
FILLET RADIUS WHERE RIGHT FLANGE JOINS TOP FLANGE0.031 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS0.062 INCHES NOMINAL
LEFT SIDE FLANGE TOP RADIUS0.031 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.062 INCHES NOMINAL
LEFT SIDE TOP FLANGE WIDTH0.187 INCHES NOMINAL
LEFT-SIDE FLANGE TIP STYLELEFT FULL RADIUS
OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE0.031 INCHES NOMINAL
OUTER RADIUS WHERE LEFT FLANGE JOINS TOP FLANGE0.031 INCHES NOMINAL
OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE0.031 INCHES NOMINAL
OUTER RADIUS WHERE RIGHT FLANGE JOINS TOP FLANGE0.031 INCHES NOMINAL
OVERALL HEIGHT0.172 INCHES NOMINAL
OVERALL WIDTH0.875 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855, CLASS 2, TYPE A, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER SYNTHETIC
MINIMUM TENSILE STRENGTH1500 POUNDS PER SQUARE INCH
NONMETALLIC HARDNESS RATING55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
RIGHT SIDE FLANGE HEIGHT0.172 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS0.062 INCHES NOMINAL
RIGHT SIDE FLANGE TOP RADIUS0.031 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.062 INCHES NOMINAL
RIGHT SIDE TOP FLANGE WIDTH0.187 INCHES NOMINAL
RIGHT-SIDE FLANGE TIP STYLERIGHT FULL RADIUS


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us