|
|
|
National Stock Number:
9330-01-502-3042
Federal Supply Class:
9330
National Item Identification Number:
015023042
Description:
PLASTIC MATERIAL,CELLULAR
Detail:
A BULK MATERIAL, RECTANGULAR IN SHAPE, COMPOSED OF A MULTITUDE OF INDIVIDUAL SMALL CELLS. IT IS PRODUCED IN VARIOUS LENGTHS, WIDTHS, AND THICKNESSES, AND MAY HAVE A FINISHED SURFACE OR A ROUGH (NATURAL) SURFACE. IT IS USED FOR LOW TEMPERATURE INSULATION, BUOYANCY, AND ALSO IN THE ELECTRICAL, DISPLAY, AND NOVELTY FIELDS. EXCLUDES CORE MATERIAL, CELLULAR, STRUCTURAL; CUSHIONING MATERIAL, PACKAGING; AND INSERT, PACKAGING.
|
Manufacturer Information:
| 160D950825-89 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 160D950825-89 | 3J310 | FOAMEX LP | | 160D950825-89 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM | | DENSITY RATING | 1.2 POUNDS PER CUBIC FOOT | | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING | | LENGTH | 24.620 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM | | MATERIAL | PLASTIC POLYURETHANE | | SPECIAL FEATURES | IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; FAR SIDE HAS 30 DEGREE CUTOUT ALONG LEFT/LONG EDGE (FAR SIDE UP) & ROUGHLY TRIANGULAR CUTOUT ALONG RIGHT EDGE, 30 TO 15 DEGREES TOP TO BOTTOM (FAR SIDE UP) AND IS MARKED ALONG LEFT EDGE: "FWD" NEAR BOOT CORNER, "UP" IN CENTER & PART NUMBER NEAR TOP; NEAR SIDE SLANTS CROSSWISE FROM BOTTOM 30 DEGREE CUT TO 0.50 FROM TOP, 9.71 FROM LEFT EDGE, ON TO MEET TOP, 4.85 FROM LEFT & BACK TO 0.50 FROM TOP AT LEFT EDGE; UPPER SURFACE HAS GRADUATED LENGTHWISE ANGLES; BOTTOM EDGE HAS CROSSWISE CUT OF 30 DEGREES, BOTTOM SURFACE TO TOP SURFACE; THERE IS A V-SHAPED CUTOUT, WITH 1 SIDE STARTING 9.37 INCHES FROM BOTTOM EDGE & 2.00 INCHES DEEP, AT 30 DEGREE ANGLE TOWARD TOP SURFACE & TOWARD BOTTOM EDGE & OPPOSITE CUT FROM 11.75 FROM BOTTOM EDGE, 2.00 DEEP, 30 DEGREES TOWARD TOP SURFACE & TOWARD TOP EDGE | | WIDTH | 16.760 INCHES NOMINAL | | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 | | SURFACE CONDITION | ROUGH | | THICKNESS | 6.790 INCHES NOMINAL |
|
|