|
|
|
National Stock Number:
6680-00-530-0665
Federal Supply Class:
6680
National Item Identification Number:
005300665
Description:
GENERATOR,TACHOMETER
Detail:
A GENERATOR CONSISTING OF A SERIES OF MOUNTED COILS SURROUNDING A ROTATING PERMANENT MAGNET OR A PERMANENT MAGNET AND A ROTATING ARMATURE. THE VOLTAGE OUTPUT IS DIRECTLY PROPORTIONAL TO THE SPEED OF ROTATION OF THE SHAFT. WHEN USED WITH AN ASSOCIATED INDICATOR, TRANSMITS SUCH DATA AS REVOLUTIONS PER MINUTE, SPEED OF TRAVEL, AND THE LIKE. MAY ALSO BE USED IN SERVOMECHANISM LOOPS AS A SYSTEM STABILIZER. EXCLUDES ROTARY INVERTERS, ROTARY CONVERTERS, MOTOR GENERATORS, DYNAMOTORS, GENERATOR SETS, SYNCHROS, FREQUENCY OR PHASE CHANGERS, AND ENGINE ACCESSORY GENERATORS.
|
Manufacturer Information:
| 588604 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 588604PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | T9172081PC1 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| OVERALL LENGTH | 3.750 INCHES | | OVERALL WIDTH | 2.250 INCHES | | OVERALL HEIGHT | 2.375 INCHES | | LENGTH OF SHAFT FROM HOUSING | 0.625 INCHES SINGLE END | | MOUNTING METHOD | FIXED BASE | | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.750 INCHES | | CURRENT TYPE | DC INPUT | | CURRENT RATING IN AMPS | 0.050 SINGLE INPUT | | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 0.0 LINE TO NEUTRAL LOW OR | | 75.0 LINE TO NEUTRAL HIGH OUTPUT | | EXCITOR TYPE | SELF-EXCITED | | TERMINAL TYPE AND QUANTITY | 2 BINDING POST | | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | 18.3 DC AND | | 37.5 DC AND | | 75.0 DC | | CALIBRATION SPEED IN RPM | 900.0 AND | | 1800.0 AND | | 3600.0 | | ELECTRICAL RESISTANCE | 286.0 OHMS | | ACCURACY RANGE IN PERCENT | -1.0 TO 1.0 | | SHAFT ROTATION DIRECTION | CLOCKWISE OR | | COUNTERCLOCKWISE SINGLE END | | ROTOR SPEED RATING IN RPM | 3600.0 SINGLE FULL LOAD | | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END | | SHAFT DIAMETER | 0.1562 INCHES NOMINAL SINGLE END |
|
|