|
|
|
National Stock Number:
6680-00-472-0073
Federal Supply Class:
6680
National Item Identification Number:
004720073
Description:
GENERATOR,TACHOMETER
Detail:
A GENERATOR CONSISTING OF A SERIES OF MOUNTED COILS SURROUNDING A ROTATING PERMANENT MAGNET OR A PERMANENT MAGNET AND A ROTATING ARMATURE. THE VOLTAGE OUTPUT IS DIRECTLY PROPORTIONAL TO THE SPEED OF ROTATION OF THE SHAFT. WHEN USED WITH AN ASSOCIATED INDICATOR, TRANSMITS SUCH DATA AS REVOLUTIONS PER MINUTE, SPEED OF TRAVEL, AND THE LIKE. MAY ALSO BE USED IN SERVOMECHANISM LOOPS AS A SYSTEM STABILIZER. EXCLUDES ROTARY INVERTERS, ROTARY CONVERTERS, MOTOR GENERATORS, DYNAMOTORS, GENERATOR SETS, SYNCHROS, FREQUENCY OR PHASE CHANGERS, AND ENGINE ACCESSORY GENERATORS.
|
Manufacturer Information:
| A1043 | 73693 | SCHULZE MFG. INC. | | CB29 | 73693 | SCHULZE MFG. INC. | | SMC192247 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| OVERALL LENGTH | 4.187 INCHES | | OVERALL WIDTH | 2.375 INCHES | | OVERALL HEIGHT | 2.000 INCHES | | LENGTH OF SHAFT FROM HOUSING | 0.562 INCHES SINGLE END | | MOUNTING METHOD | FIXED BASE | | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.000 INCHES | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.250 INCHES | | CURRENT TYPE | DC INPUT | | CURRENT RATING IN AMPS | 0.050 SINGLE INPUT | | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD | | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | 24.3 DC | | CALIBRATION SPEED IN RPM | 1000.0 | | ELECTRICAL RESISTANCE | 286.0 OHMS | | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END | | ROTOR SPEED RATING IN RPM | 10000.0 SINGLE FULL LOAD | | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END | | SHAFT DIAMETER | 0.1562 INCHES NOMINAL SINGLE END | | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND | | VERTICAL MOUNTING POSITION | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80063 | | DESIGN CONTROL REFERENCE | SMC192247 |
|
|