|
|
|
National Stock Number:
6635-00-936-7227
Federal Supply Class:
6635
National Item Identification Number:
009367227
Description:
TENSIOMETER
Detail:
AN INSTRUMENT DESIGNED TO MEASURE THE TENSION ON CABLE, WIRE AND THE LIKE BY MEANS OF A TENSION INDICATING MECHANISM WITH A DEVICE FOR ATTACHING THE MATERIAL TO BE MEASURED. SEE ALSO TESTER, MATERIAL STRENGTH.
|
Manufacturer Information:
| 30386-0043 | 17885 | AVERY WEIGH-TRONIX, LLC | | 30386-0043 | 1EW27 | DYNA-MARQ SYSTEMS INC | | XC | 17885 | AVERY WEIGH-TRONIX, LLC |
|
Techincal Specification:
| FUNCTIONAL DESCRIPTION | LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM | | MATERIAL ACCOMMODATED DIAMETER | 0.250 INCHES NOMINAL | | MOUNTING METHOD | BRACKET(S) | | SCALE NAME | COMPRESSION | | SCALE QUANTITY | 1 | | SCALE RANGE | +0.0 TO 100.0 POUNDS | | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION ONE LBS INCREMENTS | | SUPPLEMENTARY FEATURES | INDICATOR TYPE DIAL |
|
|