| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER LUG AND 2 THREADED STUD |
| CIRCUIT CONSTRUCTION TYPE | NONELECTRONIC |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| FURNISHED ITEMS AND QUANTITY | NUT 7; WASHER 7 |
| ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND SHOCK RESISTANT AND SUBMERSIBLE AND VIBRATION RESISTANT AND WATERTIGHT |
| FEATURES PROVIDED | LUMINOUS SCALE MARKING AND MAGNETIC SHIELD AND ZERO ADJUSTER |
| INDICATOR TYPE | DIAL W/POINTER |
| INSTALLATION DESIGN | PANEL |
| OVERALL DIAMETER | 2.695 INCHES MAXIMUM |
| OVERALL LENGTH | 2.650 INCHES MAXIMUM |
| PANEL FOR WHICH DESIGNED | MAGNETIC OR NONMAGNETIC |
| MATERIAL | STEEL CORROSION RESISTING |
| MEASUREMENT RANGE | +0.0 TO 50.0 MICROAMPERES, DC SINGLE INDICATOR SINGLE RANGE |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.210 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.600 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | THREE HOLE/STUD BOLT CIRCLE |
| MOUNTING BOLT CIRCLE DIAMETER | 2.440 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 SCREW AND 3 UNTHREADED HOLE(S) |
| MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| POWER SOURCE | EXTERNAL |
| SCALE DIVISION QUANTITY | 50 SINGLE INDICATOR SINGLE RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR SINGLE RANGE |
| SCALE SELECTION METHOD | TERMINAL |
| SENSITIVITY RATING | 50.0 MICROAMPERES |
| SPECIAL TEST FEATURES | ENVIRONMENTALS PER MIL-STD 202 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-M-10304/5 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | RUGGEDIZED |
| STYLE DESIGNATOR | ROUND FLUSH MTG |
| SUPPLEMENTARY FEATURES | 150 MV MAX POWER CONSUMPTION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS |
| TEST DATA DOCUMENT | 81349-MIL-M-10304 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |