| INSTALLATION DESIGN | PANEL |
| INDICATOR TYPE | DIAL W/POINTER |
| SCALE MARKING | LEFT,CTR AND RIGHT END MARKS; BAL ; CAL |
| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR SINGLE RANGE |
| SCALE DIVISION QUANTITY | 2 SINGLE INDICATOR SINGLE RANGE |
| POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER LUG |
| SENSITIVITY RATING | 50.0 MICROAMPERES |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| STYLE DESIGNATOR | ROUND FLUSH MTG |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.210 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.600 INCHES MAXIMUM |
| OVERALL DIAMETER | 2.695 INCHES MAXIMUM |
| OVERALL LENGTH | 2.650 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 SCREW AND |
| 3 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND |
| 0.130 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | THREE HOLE/STUD BOLT CIRCLE |
| MOUNTING BOLT CIRCLE DIAMETER | 2.440 INCHES NOMINAL |
| MATERIAL | STEEL |
| SURFACE TREATMENT | ENAMEL |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND |
| VIBRATION RESISTANT |
| FURNISHED ITEMS AND QUANTITY | NUT 3; WASHER 3 |
| SPECIAL MARKINGS | BAL AT CTR LINE; CAL AT RIGHT END SCALE MARK |
| FEATURES PROVIDED | MAGNETIC SHIELD AND |
| NONGLARE GLASS AND |
| ZERO ADJUSTER |
| SPECIAL FEATURES | RUGGEDIZED |
| SPECIAL TEST FEATURES | CONFORMS TO MIL-M-10304/9,TYPE MR26W152SPECR |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SUPPLEMENTARY FEATURES | 250 MV MAX POWER CONSUMPTION |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| FUNCTIONAL DESCRIPTION | USED AS INDICATOR TO INITIALLY ADJUST THE NOISE FIGURE METER TO GO OR BALANCE ADJUSTMENT AND TO CALIBRATE THE OPEN LOOP GAIN OF THE NOISE FIGURE MONITOR |