| OVERALL LENGTH | 2.557 INCHES |
| OVERALL WIDTH | 1.250 INCHES |
| OVERALL HEIGHT | 1.250 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.405 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.000 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 0.400 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 28.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.015 HORSEPOWER OUTPUT |
| TORQUE RATING AND TYPE | 1.0 INCH-OUNCES STALLED |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND |
| 85.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 5880.0 LOW NO LOAD AND |
| 7280.0 HIGH NO LOAD |
| SHAFT END CHARACTERISTIC | A28 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE END |
| UNDERCUT DIAMETER | 0.177 INCHES NOMINAL SINGLE END |
| UNDERCUT LENGTH | 0.009 INCHES MINIMUM AND |
| 0.012 INCHES MAXIMUM SINGLE END |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 0.050 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND |
| HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT STYLE A28 WITH 0.343 IN. LG,0.120 IN. DEEP FLAT |