| OVERALL LENGTH | 4.562 INCHES |
| OVERALL WIDTH | 2.375 INCHES |
| OVERALL HEIGHT | 2.875 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| 1.062 INCHES SECOND END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.920 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | TWO INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 5.0 INCH-OUNCES STALLED |
| TEMP RATING | -29.0 AMBIENT DEG CELSIUS AND |
| 65.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 300.0 AC |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 4900.0 AND |
| 5100.0 |
| CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| ROTOR SPEED RATING IN RPM | 3300.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A4 SECOND STYLE AND |
| A28 THIRD STYLE FIRST END |
| A5 SINGLE STYLE SECOND END |
| THREAD LENGTH | 0.120 INCHES NOMINAL FIRST END |
| TAPER LENGTH | 0.179 INCHES MINIMUM AND |
| 0.189 INCHES MAXIMUM FIRST END |
| SHAFT DIAMETER | 0.112 INCHES NOMINAL FIRST END |
| 0.156 INCHES NOMINAL SECOND END |
| FLATTED PORTION LENGTH | 0.7500 INCHES NOMINAL SECOND END |
| UNDERCUT DIAMETER | 0.075 INCHES NOMINAL FIRST END |
| UNDERCUT LENGTH | 0.030 INCHES NOMINAL FIRST END |
| FLAT DEPTH | 0.016 INCHES MINIMUM AND |
| 0.017 INCHES MAXIMUM SECOND END |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 0.130 INCHES MINIMUM AND |
| 0.140 INCHES MAXIMUM FIRST END |
| TAPER | 8.000 PER FOOT IN INCHES FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT END SECOND STYLE 0.157 IN. DIA; SHAFT END THIRD STYLE 0.112 IN. DIA |