| TEST DATA DOCUMENT | 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-M-17556 |
| OVERALL LENGTH | 7.906 INCHES |
| OVERALL WIDTH | 6.000 INCHES |
| OVERALL HEIGHT | 5.062 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.875 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.625 INCHES SINGLE END |
| MOUNTING METHOD | ADJUSTABLE BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.688 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES |
| INCLOSURE FEATURE | OPEN |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING IN AMPS | 0.680 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0500 HORSEPOWER OUTPUT |
| WINDING TYPE | SERIES WOUND |
| DUTY CYCLE | INTERMITTENT |
| TEMP RATING | 40.0 AMBIENT DEG CELSIUS AND |
| 50.0 OPERATING DEG CELSIUS |
| COOLING METHOD | SELF-VENTILATED |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1600.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| HOLE DIAMETER | 0.1880 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.374 INCHES MINIMUM AND |
| 0.375 INCHES MAXIMUM SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.250 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.3752 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |