6105-00-158-9575, MOTOR,CONTROL

National Stock Number:
6105-00-158-9575

Federal Supply Class:
6105

National Item Identification Number:
001589575

Description:
MOTOR,CONTROL

Detail:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.

Manufacturer Information:

017342	31922	LEEDS AND NORTHRUP CO A UNIT OF GENERAL SIGNAL CORP
051903	31922	LEEDS AND NORTHRUP CO A UNIT OF GENERAL SIGNAL CORP

Techincal Specification:

CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	25.0 LINE TO LINE FIRST MULTIPLE INPUT OR 117.0 LINE TO LINE SECOND MULTIPLE INPUT
CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS	25.0 AC
CONTROL FIELD WINDING TYPE	TWO WINDINGS, SERIES CONNECTED
COOLING METHOD	AMBIENT AIR
CURRENT TYPE	AC INPUT
FREQUENCY IN HERTZ	50.0 INPUT OR 60.0 INPUT
LENGTH OF SHAFT FROM HOUSING	1.500 INCHES SINGLE END
III OVERALL LENGTH	3.772 INCHES
INCLOSURE SPECIFICATION	COMMERCIAL
INCLOSURE FEATURE	TOTALLY INCLOSED
PHASE	TWO INPUT
PROPRIETARY CHARACTERISTICS	PACS
MOUNTING FACILITY CIRCLE DIAMETER	2.687 INCHES
MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED HOLE AND 2 UNTHREADED HOLE
MOUNTING METHOD	FACE
OVERALL HEIGHT	2.405 INCHES
OVERALL WIDTH	2.405 INCHES
ROTOR SPEED RATING IN RPM	1500.0 SINGLE NO LOAD
SHAFT END CHARACTERISTIC	A1 SINGLE STYLE SINGLE END
SHAFT DIAMETER	0.188 INCHES NOMINAL SINGLE END
TEMP RATING	5.0 AMBIENT DEG CELSIUS AND 65.0 AMBIENT DEG CELSIUS
TERMINAL TYPE AND QUANTITY	4 SOLDERLESS LUG AND 4 WIRE LEAD

Click here to Register for Free 30-day Trial