| MATERIAL | ALUMINUM ALLOY EMI/RFI CONDUCTOR |
| RUBBER SILICONE CLASS Q ENVIRONMENTAL SEAL |
| ENVIRONMENTAL PROTECTION MATERIAL LOCATION | THROUGHOUT RF SHIELDING GASKET |
| SURFACE TREATMENT | SILVER EMI/RFI CONDUCTOR |
| CROSS-SECTIONAL SHAPE STYLE | EMI |
| CROSS-SECTIONAL HEIGHT | 0.027 INCHES MINIMUM AND |
| 0.037 INCHES MAXIMUM |
| STYLE DESIGNATOR | NON-CIRCULAR |
| HOLE DIAMETER | 0.162 INCHES MINIMUM AND |
| 0.182 INCHES MAXIMUM |
| OVERALL LENGTH | 1.485 INCHES MINIMUM AND |
| 1.515 INCHES MAXIMUM |
| OVERALL WIDTH | 1.485 INCHES MINIMUM AND |
| 1.515 INCHES MAXIMUM |
| APERTURE DIAMETER | 1.250 INCHES MINIMUM AND |
| 1.270 INCHES MAXIMUM |
| OUTSIDE CORNER RADIUS | 0.243 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.146 INCHES MINIMUM AND |
| 1.166 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.146 INCHES MINIMUM AND |
| 1.166 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.170 INCHES MINIMUM AND |
| 0.175 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.170 INCHES MINIMUM AND |
| 0.175 INCHES MAXIMUM |
| BOLT HOLE QUANTITY | 4 |
| TEST DATA DOCUMENT | 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | EMI/RFI CONDUCTIVE PARTICLES SILVER |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-83528/4 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M83528/004B021 |