5999-01-156-1489, MOUNTING PAD,ELECTRICAL-ELECTRON

5905-01-156-1490 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5999-01-156-1489

Federal Supply Class:
5999

National Item Identification Number:
011561489

Description:
MOUNTING PAD,ELECTRICAL-ELECTRON

Detail:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.

Manufacturer Information:

646-7117-001

13499

ROCKWELL COLLINS, INC.

Techincal Specification:

UNTHREADED MOUNTING HOLE DIAMETER	0.156 INCHES NOMINAL SECOND MOUNTING FACILITY
BODY STYLE	RECTANGULAR
COLOR	NATURAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-19161,TYPE GTE MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	PLASTIC POLYAMIDE
PROPRIETARY CHARACTERISTICS	PACS
MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED HOLE FOURTH MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE FIRST MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY	6 UNTHREADED HOLE SECOND MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY	8 UNTHREADED HOLE THIRD MOUNTING FACILITY
OVERALL HEIGHT	0.113 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
OVERALL LENGTH	8.120 INCHES NOMINAL
OVERALL WIDTH	3.100 INCHES NOMINAL
SPECIAL FEATURES	ONE SLOT,1.000 IN. W,2.100 IN. LG
UNTHREADED MOUNTING HOLE DIAMETER	0.218 INCHES NOMINAL THIRD MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER	0.375 INCHES NOMINAL FOURTH MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER	0.140 INCHES NOMINAL FIRST MOUNTING FACILITY

Click here to Register for Free 30-day Trial