| SPLINE TOOTH QUANTITY | 36 SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 34.0 NOMINAL AND 155.0 NOMINAL |
| ZSO RESISTANCE IN OHMS | 9.0 NOMINAL AND 30.0 NOMINAL |
| ZSS RESISTANCE IN OHMS | 9.0 NOMINAL AND 10.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 7.5 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, PLUG |
| UNDERCUT DIAMETER | 0.927 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 20.0 INCH-OUNCES MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 INCH-OUNCES MAXIMUM |
| BODY DIAMETER | 1.580 INCHES MAXIMUM |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.997 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL AND 1800.0 NOMINAL |
| PILOT DIAMETER | 0.997 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 10.0 LEADING MAXIMUM AND 5.0 LEADING MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 160.0 NOMINAL AND 825.0 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 30.0 NOMINAL AND 155.0 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 2.5 NOMINAL AND 9.5 NOMINAL |
| OVERALL LENGTH | 5.275 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 22.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 0.25 AMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.000 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL AND 14.0 NOMINAL |
| SHAFT DIAMETER | 0.311 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.91 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE SINGLE SHAFT |
| SPECIAL FEATURES | 25.0 INCH-POUNDS MINIMUM STOP PIN TORQUE;PLUS/MINUS 140.0 DEGREES MINIMUM ANGULAR ROTATION;MINUS 54.0 TO 71.0 DEGREES CELCIUS OPERATING TEMPERATURE RANGE |