| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -150.0 TO 150.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 36.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 12.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.7420 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 260.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 22.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 45.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 37.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 0.1 AMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 540.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4230 INCHES MINIMUM AND 0.4530 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 88.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 11.30 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |