5990-01-128-3758, RESOLVER,ELECTRICAL,LINEAR

National Stock Number:
5990-01-128-3758

Federal Supply Class:
5990

National Item Identification Number:
011283758

Description:
RESOLVER,ELECTRICAL,LINEAR

Detail:
AN ITEM CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED WHICH PROVIDES ACCURATE LINEAR INDICATION OF SHAFT ROTATION ABOUT A REFERENCE POSITION IN THE FORM OF A POLARIZED VOLTAGE WHOSE MAGNITUDE IS PROPORTIONAL TO ANGULAR DISPLACEMENT AND PHASE RELATIONSHIP INDICATES DIRECTION OF SHAFT ROTATION. ITS WINDINGS AND SLOTS ARE NOT UNIFORMLY DISTRIBUTED, BUT INSTEAD ARE DELIBERATELY MODIFIED TO PRODUCE A LINEAR OUTPUT WHICH IS USUALLY LIMITED TO LESS THAN PLUS OR MINUS 90 DEGREES OF EFFECTIVE ELECTRICAL TRAVEL. NORMALLY IT HAS ONLY ONE ENERGIZATION WINDING AND ONE OUTPUT WINDING. SEE ALSO RESOLVER, ELECTRICAL.

Manufacturer Information:

10134468	A486G	NIMIKKEISTOKESKUS NCB FINLAND
6036-0020-02	17472	EATON AEROSPACE LLC
L0908-C	00288	CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC
L0908C	00288	CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC

Techincal Specification:

BODY MATERIAL	STEEL, STAINLESS
BODY SIZE	4
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	1833.0 NOMINAL
PHASE SHIFT ANGLE IN DEG	4.000 OUTPUT TO INPUT NOMINAL
PROPRIETARY CHARACTERISTICS	PACS
ROTOR INPUT CURRENT RATING	240.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING	600.0 ALLQJAA3.500 FINISHED-WASHER FACED
ROTOR INPUT VOLTAGE RATING IN VOLTS	8.0 NOMINAL
SHAFT DIAMETER	0.1155 INCHES MINIMUM SINGLE SHAFT AND 0.1175 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH	2.1300 INCHES NOMINAL SINGLE SHAFT
SHAFT NOMINAL THREAD SIZE	0.112 INCHES SINGLE SHAFT
SHAFT THREAD CLASS	2A SINGLE SHAFT
SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
SHAFT THREAD LENGTH	0.7500 INCHES NOMINAL SINGLE SHAFT
SHAFT THREAD SERIES DESIGNATOR	UNC SINGLE SHAFT
SHAFT TYPE	ROUND, THREADED SINGLE SHAFT
TERMINAL LOCATION	REAR
TERMINAL TYPE AND QUANTITY	4 WIRE LEAD
TEST DATA DOCUMENT	17472-6036-0020 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial