| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AFT OF FIRST FLANGE DIAMETER | 2.7500 INCHES MAXIMUM |
| BODY DIAMETER | 2.7000 INCHES MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND D |
| BODY SIZE | 31 |
| FLANGE DIAMETER | 3.1000 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.3750 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 5.1150 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 INPUT |
| MAXIMUM TEMP RISE | 20.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3800 INCHES MAXIMUM |
| SHOULDER DIAMETER | 2.7000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5950 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 1.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0300 INCHES NOMINAL |
| ROTOR INPUT CURRENT RATING | 950.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 8.3 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SECOND SHOULDER DIAMETER | 2.7500 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0030 INCHES NOMINAL |
| SHAFT DIAMETER | 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT LENGTH | 0.7000 INCHES NOMINAL SINGLE SHAFT |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| ZRO IMPEDANCE ANGLE IN DEG | 82.00 MINIMUM AND 87.00 MAXIMUM |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 121.00 MINIMUM AND 166.00 MAXIMUM |
| ZSS IMPEDANCE ANGLE IN DEG | 51.00 MINIMUM AND 72.00 MAXIMUM |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 3.40 MINIMUM AND 5.90 MAXIMUM |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |