5990-00-967-3793, RESOLVER,ELECTRICAL

National Stock Number:
5990-00-967-3793

Federal Supply Class:
5990

National Item Identification Number:
009673793

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.

Manufacturer Information:

11RC26	10112	GENERAL DYNAMICS MOTION CONTROL LLC
512-104-903-4	07421	L3HARRIS INTERSTATE ELECTRONICS CORPORATION
VRP11-4D9-50	10112	GENERAL DYNAMICS MOTION CONTROL LLC

Techincal Specification:

FREQUENCY IN HERTZ	400.0 NOMINAL
TERMINAL TYPE AND QUANTITY	8 SCREW
BODY STYLE	STANDARD ROUND C
BODY SIZE	11
STATOR INPUT VOLTAGE RATING IN VOLTS	26.0 MAXIMUM
ZRO RESISTANCE IN OHMS	605.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS	220.00 NOMINAL
ZSO RESISTANCE IN OHMS	400.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	2000.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	300.00 NOMINAL
STATOR DC RESISTANCE IN OHMS	250.00 NOMINAL
TRANSFORMATION RATIO	0.980 ROTOR TO STATOR NOMINAL
COMPENSATION METHOD	WINDING COMPENSATED
COMPENSATOR DC RESISTANCE IN OHMS	440.00 NOMINAL
COMPENSATOR TRANSFORMATION RATIO IN PERCENT	1.000 ROTOR TO COMPENSATOR NOMINAL
PHASE SHIFT ANGLE IN DEG	7.000 INPUT TO OUTPUT NOMINAL
INTERAXIS ERROR ANGULAR RANGE IN MINUTES	-5.0 TO 5.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	0.33 INCH-OUNCES MAXIMUM
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	0.11 INCH-OUNCES MAXIMUM
SHOULDER DIAMETER	0.9700 INCHES MINIMUM AND
	0.9800 INCHES MAXIMUM
PILOT DIAMETER	0.6250 INCHES NOMINAL
OVERALL LENGTH	2.4200 INCHES MAXIMUM
FLANGE DIAMETER	1.0610 INCHES MINIMUM
FLANGE THICKNESS	0.0900 INCHES MINIMUM AND
	0.0960 INCHES MAXIMUM
UNDERCUT DIAMETER	0.9995 INCHES MINIMUM
UNDERCUT WIDTH	0.0470 INCHES MINIMUM AND
	0.0530 INCHES MAXIMUM
PILOT LENGTH	0.0590 INCHES MINIMUM AND
	0.0650 INCHES MAXIMUM
SHOULDER LENGTH	0.0590 INCHES MINIMUM AND
	0.0650 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.0000 INCHES MAXIMUM
ALIGNMENT HOLE DEPTH	0.4045 INCHES MINIMUM AND
	0.4075 INCHES MAXIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8090 INCHES MINIMUM AND
	0.8150 INCHES MAXIMUM
ALIGNMENT HOLE QUANTITY	4
SHAFT TYPE	ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER	0.1873 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH	0.3900 INCHES MINIMUM AND
	0.4200 INCHES MAXIMUM SINGLE SHAFT
SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH	0.0300 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATION	REAR
BODY MATERIAL	STEEL, STAINLESS
FRAGILITY FACTOR	MODERATELY RUGGED

Click here to Register for Free 30-day Trial