5990-00-964-5296, RESOLVER,ELECTRICAL,LINEAR

National Stock Number:
5990-00-964-5296

Federal Supply Class:
5990

National Item Identification Number:
009645296

Description:
RESOLVER,ELECTRICAL,LINEAR

Detail:
AN ITEM CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED WHICH PROVIDES ACCURATE LINEAR INDICATION OF SHAFT ROTATION ABOUT A REFERENCE POSITION IN THE FORM OF A POLARIZED VOLTAGE WHOSE MAGNITUDE IS PROPORTIONAL TO ANGULAR DISPLACEMENT AND PHASE RELATIONSHIP INDICATES DIRECTION OF SHAFT ROTATION. ITS WINDINGS AND SLOTS ARE NOT UNIFORMLY DISTRIBUTED, BUT INSTEAD ARE DELIBERATELY MODIFIED TO PRODUCE A LINEAR OUTPUT WHICH IS USUALLY LIMITED TO LESS THAN PLUS OR MINUS 90 DEGREES OF EFFECTIVE ELECTRICAL TRAVEL. NORMALLY IT HAS ONLY ONE ENERGIZATION WINDING AND ONE OUTPUT WINDING. SEE ALSO RESOLVER, ELECTRICAL.

Manufacturer Information:

LTH10AS4

99932

MOOG INC.

Techincal Specification:

BODY SIZE	10
ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
ROTOR INPUT CURRENT RATING	80.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING	320.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ	400.0 NOMINAL
ZSO RESISTANCE IN OHMS	49.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	320.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	30.00 NOMINAL
STATOR DC RESISTANCE IN OHMS	90.00 NOMINAL
PHASE SHIFT ANGLE IN DEG	9.5000 INPUT TO OUTPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	15.00 OUTPUT
MAXIMUM LINEAR RANGE IN DEG	-40.0 TO 40.0
LINEARITY IN PERCENT	0.50
OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS	0.4
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	15.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS NOMINAL
BODY STYLE	STANDARD ROUND C
SHOULDER DIAMETER	0.8123 INCHES NOMINAL
PILOT DIAMETER	0.5000 INCHES NOMINAL
OVERALL LENGTH	1.6160 INCHES MAXIMUM
FLANGE DIAMETER	0.9370 INCHES NOMINAL
FLANGE THICKNESS	0.0630 INCHES NOMINAL
UNDERCUT DIAMETER	0.8400 INCHES NOMINAL
UNDERCUT WIDTH	0.0620 INCHES NOMINAL
PILOT LENGTH	0.0380 INCHES NOMINAL
SHOULDER LENGTH	0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2410 INCHES MAXIMUM
ALIGNMENT HOLE DEPTH	0.0500 INCHES NOMINAL
ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6780 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY	3
SHAFT TYPE	ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER	0.0900 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH	0.3750 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH	0.3000 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
TERMINAL TYPE AND QUANTITY	5 WIRE LEAD
TERMINAL LOCATION	REAR
BODY MATERIAL	STEEL, CORROSION RESISTING
SHAFT END PLAY	0.0003 INCHES MINIMUM AND
	0.0008 INCHES MAXIMUM
SHAFT MAXIMUM RUNOUT	0.0010 INCHES
FRAGILITY FACTOR	MODERATELY RUGGED

Click here to Register for Free 30-day Trial