| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.800 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1887.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 182.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 350.00 NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6580 INCHES NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT LENGTH | 0.4180 INCHES NOMINAL SINGLE SHAFT |
| STATOR INPUT CURRENT RATING | 40.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 90.0 MILLIWATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 2.200 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 446.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 548.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 79.00 NOMINAL |