5990-00-905-4560, RESOLVER,ELECTRICAL,LINEAR

National Stock Number:
5990-00-905-4560

Federal Supply Class:
5990

National Item Identification Number:
009054560

Description:
RESOLVER,ELECTRICAL,LINEAR

Detail:
AN ITEM CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED WHICH PROVIDES ACCURATE LINEAR INDICATION OF SHAFT ROTATION ABOUT A REFERENCE POSITION IN THE FORM OF A POLARIZED VOLTAGE WHOSE MAGNITUDE IS PROPORTIONAL TO ANGULAR DISPLACEMENT AND PHASE RELATIONSHIP INDICATES DIRECTION OF SHAFT ROTATION. ITS WINDINGS AND SLOTS ARE NOT UNIFORMLY DISTRIBUTED, BUT INSTEAD ARE DELIBERATELY MODIFIED TO PRODUCE A LINEAR OUTPUT WHICH IS USUALLY LIMITED TO LESS THAN PLUS OR MINUS 90 DEGREES OF EFFECTIVE ELECTRICAL TRAVEL. NORMALLY IT HAS ONLY ONE ENERGIZATION WINDING AND ONE OUTPUT WINDING. SEE ALSO RESOLVER, ELECTRICAL.

Manufacturer Information:

LTH11BZ3

99932

MOOG INC.

Techincal Specification:

BODY SIZE	11
ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
ROTOR INPUT CURRENT RATING	700.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING	101.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ	400.0 NOMINAL
ZRO RESISTANCE IN OHMS	2060.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS	6300.00 NOMINAL
ZSO RESISTANCE IN OHMS	68.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	127.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	820.00 NOMINAL
STATOR DC RESISTANCE IN OHMS	62.00 NOMINAL
PHASE SHIFT ANGLE IN DEG	2.100 INPUT TO OUTPUT NOMINAL
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	0.01
LINEARITY IN PERCENT	0.50
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	9.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	3.0 CENTIMETER-GRAMS NOMINAL
BODY STYLE	STANDARD ROUND C
SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND
	1.0000 INCHES MAXIMUM
PILOT DIAMETER	0.4995 INCHES MINIMUM AND
	0.5000 INCHES MAXIMUM
OVERALL LENGTH	1.9130 INCHES NOMINAL
FLANGE DIAMETER	1.0610 INCHES MINIMUM AND
	1.0620 INCHES MAXIMUM
FLANGE THICKNESS	0.0620 INCHES NOMINAL
UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
UNDERCUT WIDTH	0.0810 INCHES NOMINAL
PILOT LENGTH	0.0620 INCHES NOMINAL
SHOULDER LENGTH	0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6000 INCHES MAXIMUM
ALIGNMENT HOLE DEPTH	0.0500 INCHES MAXIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8120 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY	4
SHAFT TYPE	ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER	0.1195 INCHES MINIMUM AND
	0.1200 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH	0.3130 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH	0.0220 INCHES MINIMUM AND
	0.0320 INCHES MAXIMUM SINGLE SHAFT
SHAFT SLOT WIDTH	0.0220 INCHES MINIMUM AND
	0.0320 INCHES MAXIMUM SINGLE SHAFT
TERMINAL TYPE AND QUANTITY	4 WIRE LEAD
TERMINAL LOCATION	REAR
BODY MATERIAL	STEEL, STAINLESS
THE MANUFACTURERS DATA
MANUFACTURERS CODE	99932
DESIGN CONTROL REFERENCE	LTH11BZ3

Click here to Register for Free 30-day Trial